Proper engine oil maintenance is crucial for the efficient operation and longevity of your Honda Grom. Regularly checking and adding engine oil as needed will ensure optimal performance and prevent potential damage. Follow these guidelines for maintaining the engine oil in your Honda Grom.
Checking the Engine Oil
Keeping track of your engine's oil level is essential for smooth operation. Follow these steps to accurately check the engine oil level:
1. Warm Up the Engine:
- If the engine is cold, start and idle it for 3 to 5 minutes. This helps the oil circulate and reach the proper operating temperature.
2. Turn Off the Engine:
- Switch the ignition to the OFF position and wait for 2 to 3 minutes to allow the oil to settle.
3. Position Your Vehicle:
- Place your vehicle in an upright position on a firm, level surface to ensure an accurate oil level reading.
4. Inspect the Oil Level:
Check that the oil level is between the upper and lower marks on the oil level inspection window.
- Oil Fill Cap
- Upper Level
- Lower Level
- Oil Level Inspection Window
If the oil level is between these marks, your engine has the correct amount of oil. If it's below or near the lower level mark, you’ll need to add oil.
Adding Engine Oil
When your engine oil level is below or near the lower level mark, follow these steps to add the recommended engine oil:
1. Remove the Oil Fill Cap:
- Unscrew and remove the oil fill cap to access the oil filler opening.
2. Add Recommended Engine Oil:
- Pour the recommended engine oil slowly into the oil filler opening until the oil reaches the upper level mark.
Important Tips:
- Position Vehicle Correctly: Make sure your vehicle is upright on a firm, level surface when checking or adding oil.
- Avoid Overfilling: Do not overfill above the upper level mark to prevent engine damage.
- Keep Clean: Ensure no foreign objects enter the oil filler opening.
- Wipe Spills Immediately: Clean up any spills promptly to maintain a tidy engine compartment.
3. Reinstall the Oil Fill Cap:
- Securely reinstall the oil fill cap to ensure the engine is properly sealed and to prevent any leaks.
Recommended Engine Oil
When adding or replacing engine oil, always use the recommended type to ensure the best performance and protection for your vehicle:
- API Service Classification: SJ or higher, excluding oils labeled as "Energy Conserving" or "Resource Conserving" on the circular API service label.
- Oil Viscosity: SAE 10W-30
- JASO Standard: T 903 standard MA
- Recommended Brands:
- Pro Honda GN4 4-stroke oil (USA & Canada)
- Honda 4-stroke oil
- Or any equivalent motorcycle oil
Engine Oil Capacity
Understanding your vehicle’s engine oil capacity is essential for proper maintenance. Here are the specifics for different maintenance scenarios:
After Draining:
- Capacity: 0.95 US qt (0.90 L)
After Draining & Engine Oil Filter Change:
- Capacity: 0.95 US qt (0.90 L)
After Disassembly:
- Capacity: 1.11 US qt (1.05 L)
Regularly checking and maintaining the engine oil in your Honda Grom is vital for ensuring smooth performance and prolonging the engine's life. By following the steps outlined in this guide, you can confidently manage your vehicle’s oil needs, keeping it in optimal condition for your daily commute or long journeys.
Source: Honda Grom manual book
0 Response to "Honda Grom Engine Oil Capacity best Engine Oil recommended Specs"
Post a Comment